Energy Bill Concerns

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24
• Anti-mold filter
• Heating operation range: -4° F – 75° F
• Cooling operation range: 14° F to 115° F
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 06, 09, 12, 15, 18
• 100% heating at 5° F
• Hyper-heating performance down to -13° F outdoor ambient
• Double-vane air delivery for enhanced circulation

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Installs quickly and easily, without the need for major construction and remodeling
• Realizes maximum control and energy efficiency by cooling and heating only those spaces in use
• Comfort control of temperature, fan speed, and air direction in each room via kumo cloud® or other smart home devices
• Cleaner air with washable anti-allergen filters
• Provides instant warmth even in extreme climates (down to -13° F)
• Maximizes energy savings by using only the energy needed to perfectly cool or heat an area
• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Auto restart and auto cooling/heating changeover

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 06, 09, 12, 15, 18
• 100% heating at 5° F
• Hyper-heating performance down to -13° F outdoor ambient
• Double-vane air delivery for enhanced circulation

These large capacity standard wall-mounted units have Wide Airflow capabilities to ensure air reaches every corner of a room and includes the Powerful Mode feature for rapid cooling and heating. Options include a single-zone, cooling only model for climates where heating is unnecessary.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Offers a wide vane for a wider angle of airflow, 150° from left to right
• Motorized vertical vanes on GL24/D30/D36 models
• Installs quickly and easily, without the need for major construction and remodeling
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices
• Cleaner air with washable anti-allergen filters

We offer solutions for every need, including situations where heating is not necessary. The ST Series of air conditioners is ENERGY STAR® certified and offers up to 24.6 SEER.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Compatible with the MSY indoor unit
• Installs quickly and easily, without the need for major construction and remodeling
• Realizes maximum control and energy efficiency by cooling and heating only those spaces in use
• Installs quickly and easily, without the need for major construction and remodeling
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices

The extraordinary Trane Hyperion™ air handler represents a substantial advance in air handling technology. Using 14 industry-exclusive patents, the Hyperion offers significant advantages over other air handlers, advantages like refrigerator-styled insulation made without exposed fibrous material, which virtually eliminates sweating and condensation as well as helping create a safer environment for your home.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Quick-turn fasteners
• No leak drain pan made from rust-resistant composites and built with a gradual slope
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

More speeds, more comfort This system gives you comfort by running at the speed your home needs to stay comfortable. This allows the variable speed compressor, outdoor fan, and indoor fan to vary their speed as the temperature outside changes, slowing down or speeding up gradually when needed.

• Variable-speed fan motor
• Woven Spine Fin™ coil
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

The Hyperion™ XR residential air handler provides your home with cleaner, healthier air day and night. Advanced technology helps circulate air better, and when paired with CleanEffects™, this HVAC air handler virtually eliminates dust, pollen and other irritants from the air.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Electronic expansion valve metering device that is 400% more reliable than standard expansion valves
• Quick-turn fasteners
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

One of the best on the market This heat pump is one of the industry’s most efficient systems, with ratings up to 18 SEER2 and 8.5 HSPF2. With Trane TruComfort™ technology, the XV18 automatically adjusts itself to keep you comfortable.

• Woven Spine Fin™ coil
• Variable-speed fan motor
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

The Hyperion™ XR residential air handler provides your home with cleaner, healthier air day and night. Advanced technology helps circulate air better, and when paired with CleanEffects™, this HVAC air handler virtually eliminates dust, pollen and other irritants from the air.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Electronic expansion valve metering device that is 400% more reliable than standard expansion valves
• Quick-turn fasteners
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

Choose your speed Two-stage heat pumps use in two speeds to keep your home comfortable all year long. Our two-speed units provide an excellent mix of value, comfort, and efficiency.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ coil

The TEM4 air handler combines affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. For small area applications, this affordable air handler meets or exceeds all standard efficiency requirements.

• The TMM and GMU/V air handlers are Upflow Only for use in wall, stud, or over the water heater applications.
• Standard convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

Everyday comfort This single-speed heat pump is a great option for keeping you comfortable all year round. The XR14 will help keep you cool in the summer and warm throughout the fall and winter months.

• Spine Fin™ coil
• Compressor sound insulator (select models)
• Galvanized-steel louvered panels
• Baked-on powder paint

The extraordinary Trane Hyperion™ air handler represents a substantial advance in air handling technology. Using 14 industry-exclusive patents, the Hyperion offers significant advantages over other air handlers, advantages like refrigerator-styled insulation made without exposed fibrous material, which virtually eliminates sweating and condensation as well as helping create a safer environment for your home.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Quick-turn fasteners
• No leak drain pan made from rust-resistant composites and built with a gradual slope
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

With Trane TruComfort™ variable speed technology, the XV20i continuously adjusts its speed to meet the temperature you desire. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Compressor Sound Insulator
• Woven Spine Fin coil
• Variable-speed fan motor
• Swept fan blade
• ComfortLink II capability
• Simplified Two-Wire Connection

The Hyperion™ XR residential air handler provides your home with cleaner, healthier air day and night. Advanced technology helps circulate air better, and when paired with CleanEffects™, this HVAC air handler virtually eliminates dust, pollen and other irritants from the air.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Electronic expansion valve metering device that is 400% more reliable than standard expansion valves
• Quick-turn fasteners
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

The 17.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Full-side louvered panels
• Spine Fin™ coil
• Swept fan blade

The Hyperion™ XR residential air handler provides your home with cleaner, healthier air day and night. Advanced technology helps circulate air better, and when paired with CleanEffects™, this HVAC air handler virtually eliminates dust, pollen and other irritants from the air.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Electronic expansion valve metering device that is 400% more reliable than standard expansion valves
• Quick-turn fasteners
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

The TEM4 air handler combines affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. For small area applications, this affordable air handler meets or exceeds all standard efficiency requirements.

• The TMM and GMU/V air handlers are Upflow Only for use in wall, stud, or over the water heater applications.
• Standard convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

The 13.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil
• Full-side louvered panels protect your investment
• Baked-on powder paint resists rust
• Unique DuraTuff™ non-corrosive basepan

The XL16c is a high-efficiency, all-electric heat pump, maximizing your comfort whatever the season, year after year. The packaged heating and air conditioning system is all contained in one sleek cabinet for optimal use in any home.

• The variable-speed Vortica™ blower motor with Comfort R™ will deliver the sustained performance.
• Single and 3-phase
• Tough corrosion and UV resistant paint
• Ultra quiet Performance
• State-of-the-art fan system

The Trane XR14c heat pump package unit features an electric heat pump combined with a powerful airflow system to make sure every corner of your home will be efficiently comfortable.

• All-Aluminum Spine Fin™ Coil
• Tough corrosion and UV-resistant paint
• Advanced Vortica™ blower motor
• Rugged, all-steel cabinet
• Electronic Demand Defrost
• Advanced airflow system for quiet and efficient outdoor operation

The Trane XR14c features a stainless steel heat exchanger. Combined with a powerful airflow system, it makes sure every corner of your home will be efficiently cool and comfortable.

• Spine Fin™ condenser
• Single phase
• Composite Vortica™ blower
• Microchannel evaporator coil on 2–4 ton

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

With Trane TruComfort™ variable speed technology, the XV20i continuously adjusts its speed to meet the temperature you desire. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Compressor Sound Insulator
• Woven Spine Fin coil
• Variable-speed fan motor
• Swept fan blade
• ComfortLink II capability
• Simplified Two-Wire Connection

The S9V2 furnace boasts an impressive 96% AFUE, making it one of the most efficient furnaces in the industry. Sit back, stay warm, and enjoy lower utility use in the winter and summer.

• Comfort-R™ mode
• Two-speed inducer
• Single or two pipe vent options
• 40–120 mbth input
• Two-stage heat
• Dry contact Humidifier and EAC terminals
• Fully insulated/gasketed
• Silicon nitride igniter
• Standard 34″ height
• IFC board with digital configuration, status and fault codes
• Certified to 2% air leakage

The 17.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Full-side louvered panels
• Spine Fin™ coil
• Swept fan blade

The S9X1 furnace offers a high-efficiency constant torque ECM blower motor for comfort in cold weather, while maintaining the DNA that Trane is known for: quality and reliability. The S9X1 is rated at up to 96% gas efficiency (AFUE), providing energy savings and a consistent flow of warm, comfortable air in both winter AND summer.

• Self-diagnostic integrated furnace control board (IFC)
• Matches with single- and two-stage AC and HP for more system options
• Sealed combustion, 100% outside air option
• Multi-port, in-shot burners
• Tubular, stainless steel primary heat exchanger
• Patented Vortica™ II blower design
• Pre-painted galvanized steel cabinet
• Fully insulated for quiet operation

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

The single-stage XB90 gas furnace heater is designed to provide dependable performance and efficiency so your home and budget are both as comfortable as they can be.

• Self-diagnostic microelectronic controller
• Heavy steel cabinet
• Silicon carbide hot surface Igniter
• Multi-port, in-shot burners
• One-piece heat exchanger
• Pre-painted galvanized steel cabinet
• Sealed combustion, 100% outside air option

The 13.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil
• Full-side louvered panels protect your investment
• Baked-on powder paint resists rust
• Unique DuraTuff™ non-corrosive basepan

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

More speeds, more comfort This system gives you comfort by running at the speed your home needs to stay comfortable. This allows the variable speed compressor, outdoor fan, and indoor fan to vary their speed as the temperature outside changes, slowing down or speeding up gradually when needed.

• Variable-speed fan motor
• Woven Spine Fin™ coil
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

The S9V2 furnace boasts an impressive 96% AFUE, making it one of the most efficient furnaces in the industry. Sit back, stay warm, and enjoy lower utility use in the winter and summer.

• Comfort-R™ mode
• Two-speed inducer
• Single or two pipe vent options
• 40–120 mbth input
• Two-stage heat
• Dry contact Humidifier and EAC terminals
• Fully insulated/gasketed
• Silicon nitride igniter
• Standard 34″ height
• IFC board with digital configuration, status and fault codes
• Certified to 2% air leakage

One of the best on the market This heat pump is one of the industry’s most efficient systems, with ratings up to 18 SEER2 and 8.5 HSPF2. With Trane TruComfort™ technology, the XV18 automatically adjusts itself to keep you comfortable.

• Woven Spine Fin™ coil
• Variable-speed fan motor
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

The S9X1 furnace offers a high-efficiency constant torque ECM blower motor for comfort in cold weather, while maintaining the DNA that Trane is known for: quality and reliability. The S9X1 is rated at up to 96% gas efficiency (AFUE), providing energy savings and a consistent flow of warm, comfortable air in both winter AND summer.

• Self-diagnostic integrated furnace control board (IFC)
• Matches with single- and two-stage AC and HP for more system options
• Sealed combustion, 100% outside air option
• Multi-port, in-shot burners
• Tubular, stainless steel primary heat exchanger
• Patented Vortica™ II blower design
• Pre-painted galvanized steel cabinet
• Fully insulated for quiet operation

Choose your speed Two-stage heat pumps use in two speeds to keep your home comfortable all year long. Our two-speed units provide an excellent mix of value, comfort, and efficiency.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ coil

The single-stage XB90 gas furnace heater is designed to provide dependable performance and efficiency so your home and budget are both as comfortable as they can be.

• Self-diagnostic microelectronic controller
• Heavy steel cabinet
• Silicon carbide hot surface Igniter
• Multi-port, in-shot burners
• One-piece heat exchanger
• Pre-painted galvanized steel cabinet
• Sealed combustion, 100% outside air option

Everyday comfort This single-speed heat pump is a great option for keeping you comfortable all year round. The XR14 will help keep you cool in the summer and warm throughout the fall and winter months.

• Spine Fin™ coil
• Compressor sound insulator (select models)
• Galvanized-steel louvered panels
• Baked-on powder paint

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

The S9V2 furnace boasts an impressive 96% AFUE, making it one of the most efficient furnaces in the industry. Sit back, stay warm, and enjoy lower utility use in the winter and summer.

• Comfort-R™ mode
• Two-speed inducer
• Single or two pipe vent options
• 40–120 mbth input
• Two-stage heat
• Dry contact Humidifier and EAC terminals
• Fully insulated/gasketed
• Silicon nitride igniter
• Standard 34″ height
• IFC board with digital configuration, status and fault codes
• Certified to 2% air leakage

The S9X1 furnace offers a high-efficiency constant torque ECM blower motor for comfort in cold weather, while maintaining the DNA that Trane is known for: quality and reliability. The S9X1 is rated at up to 96% gas efficiency (AFUE), providing energy savings and a consistent flow of warm, comfortable air in both winter AND summer.

• Self-diagnostic integrated furnace control board (IFC)
• Matches with single- and two-stage AC and HP for more system options
• Sealed combustion, 100% outside air option
• Multi-port, in-shot burners
• Tubular, stainless steel primary heat exchanger
• Patented Vortica™ II blower design
• Pre-painted galvanized steel cabinet
• Fully insulated for quiet operation

The single-stage XB90 gas furnace heater is designed to provide dependable performance and efficiency so your home and budget are both as comfortable as they can be.

• Self-diagnostic microelectronic controller
• Heavy steel cabinet
• Silicon carbide hot surface Igniter
• Multi-port, in-shot burners
• One-piece heat exchanger
• Pre-painted galvanized steel cabinet
• Sealed combustion, 100% outside air option

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

With Trane TruComfort™ variable speed technology, the XV20i continuously adjusts its speed to meet the temperature you desire. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Compressor Sound Insulator
• Woven Spine Fin coil
• Variable-speed fan motor
• Swept fan blade
• ComfortLink II capability
• Simplified Two-Wire Connection

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The 17.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Full-side louvered panels
• Spine Fin™ coil
• Swept fan blade

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition

The 13.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil
• Full-side louvered panels protect your investment
• Baked-on powder paint resists rust
• Unique DuraTuff™ non-corrosive basepan

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

More speeds, more comfort This system gives you comfort by running at the speed your home needs to stay comfortable. This allows the variable speed compressor, outdoor fan, and indoor fan to vary their speed as the temperature outside changes, slowing down or speeding up gradually when needed.

• Variable-speed fan motor
• Woven Spine Fin™ coil
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

One of the best on the market This heat pump is one of the industry’s most efficient systems, with ratings up to 18 SEER2 and 8.5 HSPF2. With Trane TruComfort™ technology, the XV18 automatically adjusts itself to keep you comfortable.

• Woven Spine Fin™ coil
• Variable-speed fan motor
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

Choose your speed Two-stage heat pumps use in two speeds to keep your home comfortable all year long. Our two-speed units provide an excellent mix of value, comfort, and efficiency.

• Galvanized-steel louvered panels
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• Spine Fin™ coil

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition

Everyday comfort This single-speed heat pump is a great option for keeping you comfortable all year round. The XR14 will help keep you cool in the summer and warm throughout the fall and winter months.

• Spine Fin™ coil
• Compressor sound insulator (select models)
• Galvanized-steel louvered panels
• Baked-on powder paint

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition